HomeMy WebLinkAbout38756-Z Town of Southold Annex 5/21/2014
P.O.Box 1179
54375 Main Road
'u Southold,New York 11971
CERTIFICATE OF OCCUPANCY
No: 36933 Date: 5/21/2014
THIS CERTIFIES that the building COMMERCIAL ALTERATION
Location of Property: 10900 Route 25, Mattituck,
SCTM#: 473889 Sec/Block/Lot: 143.-34.2
Subdivision: Filed Map No. Lot No.
conforms substantially to the Application for Building Permit heretofore filed in this officed dated
3/11/2014 pursuant to which Building Permit No. 38756 dated 4/2/2014
was issued, and conforms to all of the requirements of the applicable provisions of the law. The occupancy for
which this certificate is issued is:
interior alterations to an existing commercial building(Brid eg hampton National Bank)as applied for.
The certificate is issued to Suff Cty National Bank
(OWNER)
of the aforesaid building.
SUFFOLK COUNTY DEPARTMENT OF HEALTH APPROVAL
ELECTRICAL CERTIFICATE NO. 38756 5/15/14
PLUMBERS CERTIFICATION DATED 5/14/14 Rich LaB ra, Jr.
0 lk" -
Authorized Signature
==rte TOWN OF SOUTHOLD
BUILDING DEPARTMENT
TOWN CLERK'S OFFICE
SOUTHOLD, NY
BUILDING PERMIT
(THIS PERMIT MUST BE KEPT ON THE PREMISES
WITH ONE SET OF APPROVED PLANS AND SPECIFICATIONS
UNTIL FULL COMPLETION OF THE WORK AUTHORIZED)
Permit#: 38756 Date: 4/2/2014
Permission is hereby granted to:
Suff Cty National Bank
PO BOX 9000
Riverhead, NY 11901
To: construct interior alterations to an existing Commercial building as applied for
At premises located at:
10900 Route 25, Mattituck
SCTM # 473889
Sec/Block/Lot# 143.-3-4.2
Pursuant to application dated 3/11/2014 and approved by the Building Inspector.
To expire on 10/2/2015.
Fees:
NEW COMMERCIAL, ALTERATION OR ADDITIONS $434.00
CO -COMMERCIAL $50.00
Total: $484.00
Building Inspector
Form No.6
TOWN OF SOUTHOLD
BUILDING DEPARTMENT
TOWN HALL
765-1802
APPLICATION FOR CERTIFICATE OF OCCUPANCY
This application must be filled in by typewriter or ink and submitted to the Building Department with the following:
A. For new building or new use:
1. Final survey of property with accurate location of all buildings,property lines, streets,and unusual natural or
topographic features.
2. Final Approval from Health Dept. of water supply and sewerage-disposal(S-9 form).
3. Approval of electrical installation from Board of Fire Underwriters.
4. Sworn statement from plumber certifying that the solder used in system contains less than 2/10 of 1%lead.
5. Commercial building, industrial building,multiple residences and similar buildings and installations, a certificate
of Code Compliance from architect or engineer responsible for the building.
6. Submit Planning Board Approval of completed site plan requirements.
B. For existing buildings(prior to April 9, 1957)non-conforming uses,or buildings and"pre-existing"land uses:
1. Accurate survey of property showing all property lines, streets,building and unusual natural or topographic
features.
2. A properly completed application and consent to inspect signed by the applicant.If a Certificate of Occupancy is
denied,the Building Inspector shall state the reasons therefor in writing to the applicant.
C. Fees
1. Certificate of Occupancy-New dwelling$50.00,Additions to dwelling$50.00,Alterations to dwelling$50.00,
Swimming pool$50.00,Accessory building$50.00,Additions to accessory building$50.00,Businesses$50.00.
2. Certificate of Occupancy on Pre-existing Building- $100.00
3. Copy of Certificate of Occupancy-$.25
4. Updated Certificate of Occupancy- $50.00
5. Temporary Certificate of Occupancy-Residential $15.00,Commercial $15.00
Date. `7/2/Iq
New Construction: Old or Pre-existing Building: (check one)
Location of Property: /V 100 /)16/#j /Z L/ W Tr/�t CCc
House No. �n Street Hamlet
Owner or Owners of Property: I ! TTI (T/(�� Cl'l,( I hj fS
Suffolk County Tax Map No 1000, Section T 3 Block Lot
Subdivision Filed Map. Lot:
Permit No. Date of Permit. Applicant:
Health Dept. Approval: Underwriters Approval:
Planning Board Approval:
Request for: Temporary Certificate Final Certificate: (check one)
Fee Submitted: $ �O `
ApplicantSignature
pF SOUjyolo
Town Hall Annex Telephone(631)765-1802
54375 Main Road Fax(631)765-9502
P.O.Box 1179 roger.riche rt(Dtown.Southold.ny.us
Southold,NY 11971-0959 � �O
CoUt,�
BUILDING DEPARTMENT
TOWN OF SOUTHOLD
CERTIFICATE OF ELECTRICIAL COMPLIANCE
SITE LOCATION
Issued To: Bridge Hampton National Bank
Address: 10900 Main Rd (rt 25) City: Mattituck St: NY Zip: 11952
Building Permit* 38756 Section: 143 Block: 3 Lot: 4.2
WAS EXAMINED AND FOUND TO BE IN COMPLIANCE WITH THE NATIONAL ELECTRIC CODE
Contractor: DBA: Alpha & Omega Elec Inc License No: 3936-e
SITE DETAILS
Office Use Only
Residential Indoor X Basement Service Only
Commerical X Outdoor X 1st Floor X Pool
New Renovation 2nd Floor Hot Tub
Addition Survey Attic Garage
INVENTORY
Service 1 ph Heat Duplec Recpt 20 Ceiling Fixtures HID Fixtures
Service 3 ph Hot Water GFCI Recpt 5 Wall Fixtures Smoke Detectors
Main Panel A/C Condenser Single Recpt Recessed Fixtures CO Detectors
Sub Panel A/C Blower Range Recpt Fluorescent Fixture 6 Pumps
Transformer Appliances Dryer Recpt Emergency Fixtures3 Time Clocks
Disconnect Switches Twist Lock Exit Fixtures 2 TVSS
Other Equipment: 12ft plug mold, 100a 3 phase heat pump
Notes:
Inspector Signature: Date: May 15 2014
81-Cert Electrical Compliance Form.xls
2014-05-14 13;50 » 6314748892 P 1/1
CERTIFICATION
Date: l /�
Building Permit No. -�875 6
Owner:
(Please print)
Plumber.'- r'
�a i.uo..kriru�
I certify that the solder used in the water supply system contains less than 2/10 of 1%
lead.
YItY1�1A1'C S'"afi're)
Sworn to before me this
day of
! ' , 20
Notary Public, SW ff'pI l< County
I 1W undssy
Notary Public,State of New YWk
NT F1n11?n i
Qualified in Suffolk County,� `
Comminkm Who March 2S,....5
rjf so
TOWN OF SOUTHOLD BUILDING DEPT.
765-1802
INSPECTION
I FOUNDATION I ST ROUGH PLUMBING
FOUNDATION 2ND INSULATION
FRAMING /STRAPPING FINAL
FIREPLACE & CHIMNEY FIRE SAFETY INSPECTION
FIRE RESISTANT CONSTRUCTION FIRE RESISTANT PENETRATION
ELECTRICAL (ROUGH) ELECTRICAL (FINAL)
CODE VIOLATION CAULKING
REMARKS:
71�
DATE I NSPECTOR""
of SO(/r�0
,`0 6
•
TOWN OF SOUTHOLD BUILDING DEPT.
765-1802
INSPECTI
N
[ ] FOUND TION 1ST [ PLBG.
[ ] F NDATION 2ND [ ] INSULATION
[ FRAMING /STRAPPING [ ] FINAL
[ ] FIREPLACE & CHIMNEY [ ] FIRE SAFETY INSPECTION
[ ] FIRE RESISTANT CONSTRUCTION [ ] FIRE RESISTANT PENETRATION
[ ] ELECTRICAL (ROUGH) [ ] ELECTRICAL (FINAL)
REMAR
G
DATE ` ! INSPECTOR
i
�o��OF SOUryo�
l� lyCp�
46 TOWN OF SOUTHOLD BUILDING DEPT.
765-1802
INSPECTION
[ ] FOUNDATION IST [ ] ROUGH PLUMBING
[ ) FOUNDATION 2ND [ ] INSULATION
[ ]
FRAMING /STRAPPING [ ] FINAL
[ ] FIREPLACE A CHIMNEY [ ] FIRE SAFETY INSPECTION
[ ] FIRE RESISTANT CONSTRUCTION [ ] FIRE RESISTANT PENETRATION
[ ] ELECTRICAL (ROUGH) [�C],ELECTRICAL (FINAL)
[ ] CODE VIOLATION [ ) CAULKING
REMARKS:
DATE INSPECTOR -`
i
OF SOUryo� �� 75
•
t�M£�
TOWN OF SOUTHOLD BUILDING DEPT.
765-1802
INSPECTION
[ ] FOUNDATION 1 ST [ ] ROUGH PLUMBING
[ ] FOUNDATION 2ND [ ] INSULATION
[ ]
FRAMING / STRAPPING FINAL
[ ] FIREPLACE A CHIMNEY WFIRE SAFETY INSPECTION
[ ] FIRE RESISTANT CONSTRUCTION [ ] FIRE RESISTANT PENETRATION
[ ] ELECTRICAL (ROUGH) [ ] ELECTRICAL (FINAL)
[ ] CODE VIOLATION [ ] CAULKING
REMARKS:
CODY OF
6�r
DATE INSPECTOR
souryolo -:)o 7
ia_
Comm
TOWN OF SOUTHOLD BUILDING DEPT.
765-1802
INSPECTION
[ ] FOUNDATION 1 ST [ ] ROUGH PLUMBING
[ ] FOUNDATION 2ND [ ] INSULATION
[ ]
FRAMING / STRAPPING [ ] FINAL
[ ] FIREPLACE & CHIMNEY FIRE SAFETY INSPECTION
[ ] FIRE RESISTANT CONSTRUCTION ']"" E RESISTANT PENETRATION
[ ] ELECTRICAL (ROUGH) [ ] ELECTRICAL (FINAL)
[ ] CODE VIOLATION [ ] CAULKING
REMARKS:
4-7 d�14-4—
DATE �� INSPECTOR
s
PLUMING �
INSUL ATION PER N.Y.
STATE ENERGY CODE
WA
ADDW&A COMMXTS
:.��m
z
s
TOWN OF SOUTHOLD BUILDING PERMIT APPLICATION CHECKLIST
BUILDING DEPARTMENT Do you have or need the following,before applying?
TOWN,HAL': Board of Health
SOUTHOLD,NY 11971 4 sets of Building Plans
TEL: (631) 765-1802 Planning Board approval
FAX: (631) 765-9502 Survey
SoutholdTown.NorthFork.net PERMIT NO._ Check
Septic Form
N.Y.S.D.E.C.
Trustees
Flood Permit
Examined ,20./,/ i Storm-Water Assessment Form
i
Contact:
Approved ,201Z4 Mail to: Mattituck Equities, LLC.
Disapproved a/c 414 Main St. Suite 202 Port Jefferson, NY 11777
Phone: 631-474-0946
Expiration U ,20 `5
Building Inspector
APPLICATION FOR BUILDING PERMIT
Date March, 20 14
INSTRUCTIONS
a. This application MUST be completely filled in by typewriter or in ink and submitted to the Building Inspector with 4
sets of plans,accurate plot plan to scale. Fee according to schedule.
b.Plot plan showing location of lot and of buildings on premises,relationship to adjoining premises or public streets or
areas, and waterways.
c. The work covered by this application may not be commenced before issuance of Building Permit.
d. Upon approval of this application,the Building Inspector will issue a Building Permit to the applicant. Such a permit
shall be kept on the premises available for inspection throughout the work.
e.No building shall be occupied or used in whole or in part for any purpose what so ever until the Building Inspector
issues a Certificate of Occupancy.
f. Every building permit shall expire if the work authorized has not commenced within 12 months after the date of
issuance or has not been completed within 18 months from such date. If no zoning amendments or other regulations affecting the
property have been enacted in the interim,the Building Inspector may authorize, in writing,the extension of the permit for an
addition six months. Thereafter,a new permit shall be required.
APPLICATION IS HEREBY MADE to the Building Department for the issuance of a Building Permit pursuant to the
Building Zone Ordinance of the Town of Southold, Suffolk County,New York,and other applicable Laws,Ordinances or
Regulations,for the construction of buildings,additions,or alterations or for removal or demolition as herein described. The
applicant agrees to comply with all applicable laws,ordinances,building code,housing code,and regulations,and to admit
authorized inspectors on premises and in building for necessary inspections.
Mattituck Equities, LLC.
(Signature of applicant or name,if a corporation)
414 Main St, Suite 202, Port Jefferson, N.Y. 11777
(Mailing address of applicant)
State whether applicant is owner, lessee, agent, architect, engineer, general contractor, electrician,plumber or builder
Applicant is Owner and Constructor of Alterations
Name of owner of premises Mattituck Equities, LLC. 03/11/2014 Prior Owner:The Suffolk County National Bank
(As on the tax roll or latest deed)
If applicant is a corporation, signature of duly authorized officer
Anthony J. Gitto Managing Member, Mattituck Equities, LLC.
(Name and title of corporate officer)
Builders License No. Applicant is Owner and Constructor of Alterations
Plumbers License No. Labarbara Plumbing & Heating Inc.: 47453
Electricians License No. Gering &Son, Inc. :45733
Other Trade's License No.
1. Location of land on which proposed work will be done:
10900 Main Road Mattituck
House Number Street Hamlet
County Tax Map No. 1000 Section 143.00 Block 03.00 Lot 004.002
Subdivision - Filed Map No. - Lot -
2. State existing use and occupancy of premises and intended use and occupancy of proposed construction:
a. Existing use and occupancy BANK- GROUP B BUSINESS
b. Intended use and occupancy BANK- GROUP B BUSINESS
3. Nature of work(check which applicable): New Building Addition Alteration X
Repair Removal Demolition Other Work
(Description)
4. Estimated Cost $ 38,000 Fee
(To be paid on filing this application)
5. If dwelling,number of dwelling units 0 Number of dwelling units on each floor 0
If garage, number of cars 0
6. If business, commercial or mixed occupancy, specify nature and extent of each type of use. BANK
7. Dimensions of existing structures, if any: Front 54.15' Rear 54.15' Depth 37.15'
Height 22' ± Number of Stories 1
Dimensions of same structure with alterations or additions: Front N/A Rear
Depth Height Number of Stories
8. Dimensions of entire new construction: Front N/A Rear Depth
Height Number of Stories
9. Size of lot: Front 138.0' Rear 126.0' Depth 171.45' /244.30'
10. Date of Purchase 03/11/2014 Name of Former Owner The Suffolk County National Bank
11. Zone or use district in which premises are situated B General Business
12. Does proposed construction violate any zoning law, ordinance or regulation?YES NO X
13. Will lot be re-graded? YES NO X Will excess fill be removed from premises?YES NO X
02
14. Names of Owner of premises Mattituck Equities, LLC.Address Port was,St,sortsPort��.N.Y.1»n 1 Phone No. 631-474-0946
LM Btu
Name of Architect Eric Nicosia, RA. Address� 8l Phone No 631-928-4456
Name of Contractor Mattituck Equities, LLC. Address Port-i gasman_N V ,,,,, Phone No. 631-474-0946
15 a. Is this property within 100 feet of a tidal wetland or a freshwater wetland? *YES NO X-1101±
* IF YES, SOUTHOLD TOWN TRUSTEES &D.E.C. PERMITS MAY BE REQUIRED. TO JAMES CREEK LZ
b. Is this property within 300 feet of a tidal wetland? * YES X NO
* IF YES,D.E.C. PERMITS MAY BE REQUIRED.
16. Provide survey, to scale,with accurate foundation plan and distances to property lines.
17. If elevation at any point on property is at 10 feet or below, must provide topographical data on survey.
18. Are there any covenants and restrictions with respect to this property? * YES NO X
* IF YES, PROVIDE A COPY.
STATE OF NEW YORK)
SS:
COUNTY OF Si r(To V—)
AnthonyJ. Gitto being duly sworn,deposes and says that(s)he is the applicant
(Name of individual signing contract)above named,
(S)He is the Managing Member, Mattituck Equities, LLC.
(Contractor, Agent,Corporate Officer,etc.)
of said owner or owners,and is duly authorized to perform or have performed the said work and to make and file this application;
that all statements contained in this application are true to the best of his knowledge and belief, and that the work will be
performed in the manner set forth in the application filed therewith.
Sworn to before me this
i O day of W G -O i 20 )L4
MONETTE M
NotaryPublic NOTARY PUBLIC,STATE OF NEWYORK ignature of Nrtant
REG NO Ot MOWB1358
QUALIFIED IN SUFFOLK COUNTY
COMMISSION EXPIRES OCTOBER 07,204
'Of S��ryo
Town Hall Annex � Telephone(631)765-1802
54375 Main Road �F � ��
P.O.Box 1179 G Q roger.richertEcvtOWR sou o nv us
Southold,NX 11971-0959
���COUNTL�� i
BUILDING DEPARTMENT
TOWN OF SOUTHOLD
APPLICATION FOR ELECTRICAL INSPECTION
REQUESTED BY: Date:
Company Name:
Name: -73
License No.: 3g? 6 —,e� I:
Address:
� Al
Phone No.: (�3 — !1
JOBSITE INFORMATION: (*Indicates required information)
*Name: 0
*Address: 10500 111
Cross Street:
*Phone No.:
i
Permit No.:
Tax-Map District: 1000 Section: Block: Lot: p4�r
*BRIEF DESCRIPTION OF WORK(Please Print Clearly) G
CI)4ee,7,�XJ
( — 2_0 A ens-0 WL) C v C u t /00 .7z PcJwt
e �
(Please Circle AN That Apply)
*Is job ready for inspection: YES/ O Rough in Final f
*Do you need a Temp Certificate: YES/ O�
Temp Information(if needed)
*Service Size: 1 Phase C3Ph:as:e 100 150200 300 350 400 Other
*New Service: Re-connect Underground Number of Meters Change of Service Overhead
Additional Information: PAYMENT DUE WITH APPLICATION
• � Imo_ -
82=Request for Inspection Form
Q I
f
Y `
Scott A. Russell ,yW `- >t, James A. Richter, R.A.
SUPERVISOR . Michael M. Collins, P.E.
SOUTIIOLD"TOWN HALL-P.O.Box 1179 k � 53095 Main Road-SOUTHOLD,NEW YORK 11971
Telephone#: (631)-765-1560 Fax#: (631)-765-9015
MICHAEL.COLLINS@TOWN.SOUTHOLD.NY.US ."u<r% JAMIE.RICHTER®TOWN.SOUTHOLD.NY.US
T .r
Office of the Engineer
Town of Southold
STORMWATER MANAGEMENT CONTROL PLAN REVIEW COVER SHEET
( TO BE COMPLETED BY THE APPLICANT )
PLEASE NOTE: All Contact & Project Information Requested by this FORM is Ncssary for a Complete 'Application.
APPLICANT- (Property Owner.Design Professional,Agent,Contractor,Otheri PROPEP Y OWNER: If Different from Applicant'
NAME: Mattituck Equities, LLC. NAME: Mattituck Equities, LLC.
ADDRESS: 414 Main St. Suite 202 ADDRESS: 414 Main St. Suite 202
Port Jefferson, NY 11777 Port Jefferson, NY 11777
Telephone Number: 631-474-0946 Telephone Number: 631-474-0946
Completed Applications can be picked up at the Engineering Department after being notified by the Department,or:
it can be Mailed to the Applicant with the submission of a Sell" Addressed 8.5'x 1 1' Envelope& Appropriate Postage.
DATE: March , 2014 Property Address / Location of Construction Work:
10900 Main Road Mattituck, N.Y.
S C T M 11: 1000 143 03 4.00_2 South West Corner of Route 25 & Bay Avenue
District Section Block Lot
Required Documents for Storm��-ater Review
Copy of Complete Building Permit Application.
Stormwater Management Control Plan. (2 Sets) Interior Alterations only
Note: SMCP's are required whenever Grading or Excavations exceed 5,000 S.F,when New Impervious Surfaces are
created,and/or when existing Roof Systems, Driveways,Patios or other Impervious Surfaces are Re-Surfaced.
De Minimis Projects will NOT be Subject to the Submission of a SMCP During the Stormwater Review!
Note: These Projects would be Limited to Interior Renovations, Replacement of exterior Doors&Windows,Deck Construction
with Loose Fit Decking, Installation and/or Modification of Mechanical Systems or other similar Work.
A Complete Description of the Scope of Work Proposed under the Building Permit Application.
A Completed Stormwpq Review C cklist. If No or NA are Indicated, Justification is Required.
*** FOR El �]° G DEPARTMENT USE ONLY ****
Reviewed By: Date: 3 �r
Ate roved:
❑ At diti al Information Required:
A " CHAPTER 236
;. STORMWATER MANAGEMENT CONTROL PLAN CHECK LIST
J:t
r
1DATE: March , 2014 APPLICANT: iProperty owner.llesr,n Professional.Agent,Contractor.Other;
NAME: Mattituck Equities, LLC.
S C T M #: 1000 143 03 4.002 631-474-0946
Telephone Number:
District Section Block Cot
S M P - flan fiec]ull-emellts: Th^applicant must provide a Complete Explanation and/ur validation of all Information Required by this Checklist if it has not beeii provided'
1. A Sitc Plan drawn to scale Not Less that GO'to the inch MUST — If You answered No or NA to an � � � 'cation Hcrel
show all of the followinn items: YE NO NA If you need additional r or explanatxpns, Please Provide ad nal Paper.
a. Location & Description oh Property Boundaries 0
b. Total Site Acreage.
c. Exizting -Natural & Man Made Features within 500 L.F. INTERIOR ALTERATIONS ONLY TO EXISTING BA
of the Site Boiwdar� as required by§236-i/;c�2)
d. 'Int Hole Data Indical inr?Soil Characteristics&Depth to Ground Water.
c. Limits of C Tearing & Area ol' Proposed Land Disturbance. 0�
f. Existing & Proposed Contours of the Site (hhnunum 7 Intervalsi
Local ion of all existing & proposed structures, roads,
driveways, sidewalks, dramage Improvements& utilities.
It. Spot Grades & Finish Floor Elevations for all existing&
proposed structures.
I. Location of proposed Swimming Pool and discharge ring, 0
.1. Location ol' proposed Soil Stockpile Area(s). _--
k, Lucation of proposed Conslruchon Entrawc/Stauutg Area(s).
1. Location of pro posed concrete: washout area(s).
M. Lucatiau ui all prolwsed erosion&sediment control ineasuies.
�. Slorrimaler Nla;nagernent Control Plan must inciade Calculations sIhowin;
that the stunnwater nnprovetnents are sized io capture,store,and infiltiale
orrsie the run-off from all imperviou-s.5ijrl generated by a two iZinch
rainfall!storm event.
3. Details§ Tonal Drawings for Aormwatcr practices are required for approval.
Berns rccltliring details shall include but not be limited to:
a. Erosion &Sediment Controls.
b. Construction Entrance& Site Access.
c. Inlet Drainage Structures ie.g, catch basins. trench drains,etc.,
d. Lcachiw,, Clruclures ie.;. mfillr.nlron hasin=,swales.etc.'
FY7R V ' SWCP (hcck Li�i -TOS JAN 2014
pG SO(/ryol
Town Hall Annex Telephone(631)765-1802
54375 Main Road Fax (631)765-9502
P.O. Box 1179 G
Southold,NY 11971-0959
BUILDING DEPARTMENT
TOWN OF SOUTHOLD
May 16, 2014
Mattituck Equities Inc
414 Main St, Suite 202
Port Jefferson, NY 11777
RE: 10900 Main Rd, Mattituck
TO WHOM IT MAY CONCERN:
The Following Items(if Checked)Are Needed To Complete Your Certificate of Occupancy:
Application for Certificate of Occupancy. (E losed)
electrical Underwriters Certificate.
A fee of$50.00.
Final Health Department Approval.
Plumbers Solder Certificate. (All permits involving plumbing after 411/84)
Trustees Certificate of Compliance. (Town Trustees#765-1892)
/ Final Planning Board Approval. (Planning#765-1938)
Final Fire Inspection from Fire Marshall.
Final Landmark Preservation approval.
Final inspection by Building Dept.
Final Storm Water Runoff Approval from Town Engineer
BUILDING PERMIT — 38756 — Commercial Interior Alteration
VOO •�,.M
dp
.- OSIGN
MH
�4 ti 'TAX U)T 4.2 CT
Gam". '� W •`;
SIGN
WDF B
0.8
'} x h•�
36.40
'ti..
26.30 54'1y
STORY `
z O BRICK CB
BUILDING
.x
o .r
Cg •e
0 • VAULT 36.0
W c 54.15
O C�
28.70 '
TAX LOT 4:1
0.5E Q }•: r.r1
CLF
0.6W r�
-P
l�
z
9 STALLS :: o
CONC
WDF o " MON
CLF 1.4E BLDG FND
O.L 2.4S 2.9S
BLDG
2.8S TAX LOT
5
THE EXISTENCE OF RIGHT OF WAYS AND/OR EASEMENTS OF RECORD,IF ANY,NOT SHOWN ARE NOT GUARANTEED.
THIS SURVEY WAS PREPARED IN ACCORDANCE WITH THE EXISTING CODE OF PRACTICE FOR LAND SURVEYORS ADOPTED BY THE NEW YORK
STATE ASSOCIATION OF PROFESSIONAL LAND SURVEYORS.
ANY ALTERATION OR ADDITION TO THIS SURVEY IS A VIOLATION OF SECTION 7209 OF THE NEW YORK STATE EDUCATION LAW.COPIES OF
THIS SURVEY MAP NOT BEARING THE LAND SURVEYOR'S INKED SEAL OR EMBOSSED SEAL SHALL NOT BE CONSIDERED TO BE A VALID TRUE
COPY.NO OFFICIAL OF THIS STATE,OR OF ANY CITY,COUNTY,TOWN OR VILLAGE THEREIN,CHARGED WITH THE ENFORCEMENT OF LAWS,
ORDINANCES OR REGULATIONS SHALL ACCEPT OR APPROVE ANY PLANS OR SPECIFICATIONS THAT ARE NOT STAMPED.CERTIFICATIONS
INDICATED HEREON SHALL RUN ONLY TO THE PERSON FOR WHOM THIS SURVEY IS PREPARED,AND ON HIS OR HER BEHALF TO THE TITLE
COMPANY,GOVERNMENTAL AGENCY AND LENDING INSTITUTION LISTED HEREON AND TO THE ASSIGNEES OF THE LENDING INSTITUTION. 24763.2 Sq. Feat
CERTIFICATIONS ARE NOT TRANSFERABLE TO ADDITIONAL INSTITUTIONS OR SUBSEQUENT OWNERS. 0.6 Acroa
SCTM DIST:1000 SECT:143.00 BLK:03.00 LOT:004.002
MAP NO:DEEDED DATE:
LOT(S): BLOCK: VIS
MAP OF: MATTITUCK BRANCH OF SUFFOLK COUNTY NATIONAL BANK C-D o ;,
LOCATION: Situated at MATTITUCK * 'k
TOWN OF SOUTHHOLD ,SUFFOLK COUNTY ,STATE OF NEW YORK ct
NORTON BROTHERS DUNN CERTIFIED TO: ° 0
Engineering and Surveying,L.L.P. O
LAND
294 Medford Avenue (631)475-1452 v
Patchogue,New York 11772 (631)475-0403/fax Louis H.Visconti
SCALE:1'-30' SURVEYED: 12-11-13 FILE NO:24011NYSLS No.050190
am
ited
Made in g Woo States IncAmedm bY:Fahricodo en Fstades Unites par:Febdque aux Eas—Una per:
Armstrong World Intl. n.,Lmxaskr.L PA 17664
SS1� 83107-7ype XLD
ACOUSTICAL MATERIA704A
L ��ASS1,,Pt Cortege Angled Tegular
�� Contents Not over 64 Sq.Ft. �� .
�Mm B) IOprp No. AG—6669 C
24 in x 24 m is 5ft in(Irominao o --
SURFACE BURNING CHARACTERISTICS 610 mm x 610 mm x 16 mm
r X [0
RAME SPREAD............25 WHITE W Q
SMOKE DEVELOPED ........50
64 sq ft(5.95 m2)
ACOUSTICAL o -
PROPERTIES BLANCO
NRC 0.55 in accordance with ASTM C423.
CAC min.33 in accordance with ASTM E1414. BLANCU ��■M
16-pieces
15/16" C W���a
LA5671 IL R--020724 norm
a --.-�
Apprmed by the Board of Standards ora16 pietasd Appeals g:27:30 AM 16 pikes
For USE in New York City RRder Cal.No. 1031-57—SM Y` 23 MAR 14
! o1rNp ...en ft*MM YaRE00R MM AIRI ON PDOMR COmmBR MENiORES ERMEW Oyam17141a Of OE LA Sign FRED%"COMMIR MUS Uh igia AR7a M ALES-
R.; �oowy re0av0e Oudlq 90 Installation be certain that Ulassroo da Primaax s'sNxear qua Is aria du travail est Ciao 9rb POxINd Oloolikkat alsppb is Yswiedgi,mom de que d Ager o,
the work site Is well aelltlWled and v"breaching dust Avoid 11esWlW5on at bli er de resphor lea poussWee du Prodidt EWtef had contact sabele sate bon vartw y am respire,d pow.Evlte of ardacto con W pit o
conte t with ddrl or eyes.WCs taO-strew,kxse filling"No, avec le Paan W lea yemc Paler des vNWsnte ampler,E menclsa k noxis,at can be Out.Use rape de mop forge y asona,Worries,y PmNCcldl fart too
gores and eye prolecilon.GA and trim with Iedk,ram or had lies gents at lunettes de prowcUoo.Cooper at ralusler Is matildel avec on O•Cate y rearte tin un tucNllo,cos axd6W a ors skim menial.No arta
saw.Do not cut with power equipment unless either a dust couteau,un resoir Wane seta A olein.Ne pas Doper A Peke d'Agidpement Can epwdx meediftoe a mw=Qua$8 eePlee M As da pow con d
collects Is used on the equipment or local exlamst Is used and a blectrque A mops qu'6 ne saN dqulpil d'un colkateur do po ssibre W quo W aparsto 0 un med o dl escape local,y se use on IeslArador eP ON&our NIOSH
NIOSH approved respirator Is worn to Prevent overexposure to m on cork efiectule par a nstim It W source at qu'un epparell de prolictim Pae adar lora expoeiddn pe6groes a W once y a In fir vNeae wit kdela
akbome once and men-made vlmx fins. respiremue,Iomaloguli par NIOSH will pall Par rapdateur poor ompAdar No >n>re1 d
OFMMIWSOIM To AIRBORNE 0001 + A W d as floras vftm ayMh6ligNs an s spasi0n dao
_ fair. LA 809REWSSIC160 AL PGLVO
ETE IRIR®OYEREE►0$OR S►IRARLE u AMI POUBs�m6 E tjjjpn TRANSPORTA00 POU EL AIRE FIND ,
1NT$U M SILMA Se K04VA IRiR[OIM FROM RW M NIRIOUIeII Bre EOB MMPew011 LA POW
E = A LA PROEOIW RIIIQACLeRES RliFR UMORE, 0 A LAS T O III u ;
R6fFRIMORRR,R!LA►EAU ET OEE TMAL LA �EIPOMM611 A LA ehlli CRNIWJwA 0 A LAS PNIRAS EIINFAS ' ;
CAIME$MUOOS CNNONM OR OELSEEO LOUG GREASE OR MIIIFJmom A LA an curna1me REePMAR1E OO AOA Pon AwnFNMALES FUSOE PIDWOCAR ENFERRIEM POLMONARea
CANEEII.FM6 Rola CIAamrsto count m am NNIAIEG Y MMM$vmmhmm For OAYas as MALA PGIJLONAaMI a*Wm 0 Smania nig;@mRMU,IMAUL Y.z"N,MOMMA
FROM OCCUPATIONAL SOURCE$AS CARCINOGENIC TO CIMMNMIE 00 001,E FAR OO LE CA MM IE=A.CLUB 6 _ jplplaNeYl olm*AOA=.Pearls LAMALI%OW 011 1 _
'IaIILANL LRSNWIDN OR YAM emmuIlE VME era ixt FMFN MNMU BI SIMS NMAANOL
F4ndAM Meaaaaa Ifeye or ddn consnt occurs,flush with pkrAy LRNeANL
of water for at ked 15 missiles and remove contaminated clothing. Muses do ptaalws anmrq E n ca de cadet avec les yarn W W peat'Anes Primates AnOw SI ocume on conlaato con los 0Jos 0 con W pit,NOON
After Installing material,wash with warm water and mild asp. A gw&ON peaknt au moi a 15 manages at maw in vii ara is camtemYo6s, can oulbords ague o pa 15 mdmft caro mfnkno,y mite W rope cartamYs lo.
Wash work dc0as sepaaldy from dhs clothing.Rinse washer Aprbs avoir eaeChA rllatelaaW du nv*M,as lover avec de 1'eau chade at un DOW*de W YateWow dal material,Item can ages fiW If OM a".lave
sawn dou&lava tae Wmauft do(mist*ardniem des autres vA s aft W mpa de tub*pur seperado de W otra rope.ftiogue el wamapea a fando. 1
Rkm W Wiese 8 fond Refer to Armstrong MSDS(which includes Information on Waft We Imes de Mamecidn MSDS doAmatrWp(qua lnduyen k macido It
eatabnshed occ paEorel exposure nmla)which are avall"from So reporter AW Will WFMWqW*M*Wo W I nclot des rerselOnananAea sabre bre los limbs de expodci6n laborel establecidos)qua Be encuentran111
ins limbs d'exposltlan AWblles on milieu de trevalq qui art dispontele an a trsv6s de Artndrang o de sur WPMAmstro ng or yaw employnda
employee demantAArmahon g W A vohe ernployeul Pen
Made in the United States by Amshong World Industries,Inc., Fabr1qu6 aux Etats-Unix par Armstrong World Indushies,Inc.,Lancaster, Heft an los raWdos Ihnkos pa Armstrong Wald kkabtes,Industries,Inc.,
Lai nster,Pennsylvania 17504. Pesesylverde 17604. Lancaster,PaaayNaia 176(14.
Do not store a instal under candltlora wham relative humility exceeds 70%.(Except Huml(luen fm Pica and Hu niGuad"'Max)Ne pas reopen ni pow to prods(aux enddta our I'hundAb reWtive aurpaese 70%.
+, (Exception HumR3uad-PLA of HumdGundPO Ma4Q No guade o Inside en cw dUmm donde talxanwdad mbliva w=da el 70%.(Exoepto H n aswdm pkm y H000umr Max)
Ctaes A perAS1M E 1254.Claves A aeon W a ASTM E 1264.Close A por la ASTM E 1264. LA-291515-.71W
0 A
-J
Mohawk Commercial Product Specifications http://www.themohawkgroup.com/product-search/product-specs.asp...
BQ345 Tailored Fit " s
la;gxy>sw Yyg�v'� � Idl@'Itld d(
Collection Business Casual f
Brand Bigelow
Product Type Broadloom
DESIGN
Minimum Sq.Yd. No minimum
Construction Tutted
Surface Texture Textured Patterned Loop
Gauge 1/10(39.37 rows per 10 cm)
Density 5425
Weight Density 119,350
Stitches Per Inch 11.3(44.49 per 10 cm) Color may vary from dye lot to dye
Finished Pile Thickness .146"(3.71 mm) lot.Substitution of material may be
Dye Method Solution Dyed/Yarn Dyed made due to improved technology,
Backing Material Weldlok® supply limitations,or other factors.
Fiber Type Colorstrand®Nylon The performance is not affected by
Face Weight 22 oz.per sq.yd.(746.02 g/m2) such variances.All Specifications
Pattern Repeat 1.2"(w)x 4.9"(L) are subject to normal manufacturing
Soil Release Technology Sentry Plus tolerances.
Indoor Air Quality Green Label Plus 1252
Foot Traffic Recommendation TARR Heavy www.mohawkgroup.com
NSF 140 Gold 800.554.6637
PERFORMANCE
Static AATCC-134 Under 3.5 KV
Flammability ASTM E 648 Class 1(Glue Down)
Smoke Density ASTM E 662 Less than 450
SERVICE
Warranties Lifetime Limited Wear Warranty
Lifetime Static
V
I of 1 4/30/2014 4:43 PM
EXCELON® A�mstrong-
VinylRAFFIA'" • ChromaSpin'" • Stonetex° • Companion Square®Composition Tile (VCT) COMMERCIAL FLOORING
Market-leading performance,quality and durability in VCT products all from Armstrong,the industry leader in VCT for decades.True
through-pattern construction provides extended floor life.Raffia is a new 12"x 24"linear visual tile in tone steps that will instantly soften
the room.It includes pre-consumer and post-consumer recycled content.ChromaSpin offers an exciting,familiar,chromatic visual in 32
different color spins with consistency in visual from color to color and tile to tile with pre-and post-consumer recycled content.Stonetex
has a granite-like visual and organic colors in a true non-directional the featuring Color CONTINUUM-",an exclusive color system organized
in tonal steps to unite hue,value and chroma.Companion Square allows for design flexibility with four accent colors randomly occurring on
each tile with a neutral background.
Construction Vinyl Composition Tile
Product Line Raffia,ChromaSpin,Stonetex,Companion Square
International Product ASTM F 1066-ThroughPattern,ISO 10595,Type II
SpecificationsYP
Overall Thickness 1/8 in.(3.2 mm)
Wear Layer Thickness 1/8 in.(3.2 mm)
Finish Fast Start factory Finish -
Installation Full Spread Adhesives-S-515 High-Moisture,S-525 High-Moisture,S-700 Thin Spread,S-750 Premium
Maintenance Options Polish - -
Tile Sizes ChromaSpin,Stonetex,Companion Square-12 in.x 12 in.(305 mm x 305 mm)
Stonetex only-18 in.x 18 in.(457 mm x 457 mm);Raffia only-12.in x 24 in(305 mm x 610 mm) -
Tiles Per Carton 12 in.x 12 in.-45(45 sq,ft.);18 in.x 18 in.-20(30 sq.ft.);12.in x 24 in.-22(44 sq.ft.)..
Shipping Weight 12 in.x 12 in.-63 lbs.(28.6 kg);18 in,x 18 in.-64 lbs.(29 kg);12 in,x 24 in.-:61 Ids.(27;7 kg)
j Thickness ASTM F 386 Nominal m 0.005 in. Meets
.;: Size ASTM F 2055 m 0.016 in.per linear foot Exceeds -
Squareness ASTM F 2055 0.010 in.max Exceeds
Indentation-One Minute ASTM F 1914 z 0.006 in,to z 0.015 in. Meets
Indentation at 115'F ASTM F 1914 <0.032 in. Exceeds
CLr.
a� Impact ASTM F 1265 No cracks beyond limit Exceeds
�[ Deflection ASTM F 1304 1.0 in.minimum Exceeds
Dimensional Stability ASTM F 2199 s 0.024 in.per linear foot Exceeds
Chemical Resistance ASTM F 925 No more than slight change in surface dulling, Meets or Exceeds
attack or staining
Resistance to Heat ASTM F 1514 AE s 8 Exceeds
Static Load Limit ASTM F 970 s.0.005 in. 125 psi
Fire Test Data-Flame Spread ASTM E 648 0.45 watt/cm2 or more Class I Meets
Fire Test Data-Smoke Evolution ASTM E 662 450 or less: Meets
I
Regional Materials LEEDS MR5.0 Meets Guidelines Meets
�-_ Recycled Content LEED MR4,0 Meets Guidelines - Meets
& Certified Low Emitting Product LEED EQ4,3 Meets Guidelines .Meets
Lairs
Certified Low Emitting Adhesive LEED E04.1 Meets Guidelines Meets
''. Indoor Air Quality FloorScore:" Meets Certification Guidelines .Certified
Indoor Air Quality CHPS 01350 Meets Certification Guidelines Certified
NSF/ANSI 332 Sustainability Assessment Meets Certification Guidelines .Gold Level Certified
5-Year Commercial Warranty when installed in accordance with Armstrong's Guaranteed Installation Systems manual,F-5061
Installation Instructions-www.armstrong.com/pdbupimages/200839.pdf
Maintenance Information-www.armstrong.com/pdbupimages/l97969.pdf.'
View the full line-www.armstrong.com/commflooringna/products/vct
EmailTechline-www.armstrong.com/commflooringna/contact_techline.jsp
�jY__
www.armstrong.Com/commercialflooring • 1 877 276 7876 02012 Armstrong World Industries,Inc.
nmrt,
EXCELON®
a mstrong-
RAFFIA'" ChromaSpin'"' • Stonetex® • Com `_
Vinyl Composition Tile (VCT) COMMERCIAL FLOORING
II Sustainability Facts
-# s Serving As Served
Raffia•ChromaSpin•Stonetex•Companion Square
Certified to meet LEED°EQ Credit:Low Emitting Interiors01111111 ✓
a4 Pre-Consumer Recycled Content 1%
Chroni n-10%
M k
Regional Materials" Kankakee,IL
Jackson,MS
Southgate,CA
6 ,y g t Adhesives
Certified to moot LEED•EQ Credit:Low Emitting Interiors ✓
yy qt of
G FloorScore'Certified to CDPH Standard
Method V1.1-2010 ' ✓
Collaborative for High Performance Schools
CHPS-IE02.2&LASS-21rIEQ4.3 ✓
§,y U.S.Green Building Council Member ✓
Canada Green Building Council Member ✓
w
NSF(ANSI 332 Gold Level Certified ✓
f
Factory applied acrylic finish
for protection during
installation and uniform gloss
r t �
Filled vinyl chips
Raffia Stonetex
r
1a Zt1
55800 55803 52183 52189 OEM 52140 52126 52127 52165 52143 52128 52139 52172 52141 52180
s
55801 55804 52186 52179 52202 52125 52160 52122 52166 52149 52168 52156 52173 52135 52155
■®■®
55802 55805 52194 52199 52161 52144 52147 52167 52164 52169 52170 52157 52148 52154
w"Ii
4 p',
ChromaSpin
55806 55813
JIM< f ,
AE a kfMo
65807 55812 54800 54803 54807 54804 54814
=�Ir
l
5h808 5581 ■54801 54805 54808 54812 54810 54815 54818 54817 54822 54824 54825 54827 54828 54831
56811 55809 54802 54806 54809 54813 54811 54816 54819 54820 54821 54823 54826 54829 54830
Companion Square
51977 51973 51974 51983 51972 51970
www.armstrong.com/commercialflooring • 1 877 276 7876 02012 Armstrong World Industries,Inc.
MATERIAL SAFETY DATA SHEET
I.PRODUCT IDENTIFICATION
Name:Armstrong Resilient Sheet Flooring Products and
Armstrong Resilient Tile Flooring Products
Description:Vinyl Flooring Resilient Sheet Flooring Products and
II.DEPARTMENT OF TRANSPORTATION INFORMATION Resilient Tile Flooring Products
Shipping name: Not Classified. Hazard Class: N/A. ID#: N/A Prepared 6/12
EMERGENCY ONLY CONTACT: CHEM-TEL-1-800-255-3924
Armstrong World Industries, Inc.
Ill.HMIS(0=minimal hazard;4=severe hazard) P. O. Box 3001
Health=0 Flammability= 1 Reactivity=0 Lancaster, PA 17604www.armstrong.com
MSDS: www.floorexpert.com
IV.PRODUCT CONTENT Technical Services:
This product does not contain chemicals subject to the reporting 1-877-276-7876, Option 2,3,3
requirements of Section 313 of SARA Title III and 40 CFR 372.All
components are on TSCA inventory.This product does NOT contain
asbestos.
V.HAZARDOUS INGREDIENTS
(Chemical Identity;Common Name) C.A.S.No. % OSHA PEL ACGIH TLV
None N/A N/A N/A N/A
DESCRIPTION AND INGREDIENT INFORMATION
These vinyl flooring products are produced for residential and commercial(architectural)marketplace use.They come in a wide
variety of aesthetic designs, styles, colors surface finishes and sizes.
MISCELLANEOUS INFORMATION
Each of these products is classified as an"article"according to Title 29 of the Code of Federal Regulations, OSHA Part
1910.1200(c).They are formed to a specific shape or design during manufacture, have end use functions dependent upon their
shape or design, and do not release any hazardous chemical under normal conditions of use.
VI.PHYSICAL DATA XI.SPECIAL HANDLING AND USE INFORMATION
APPEARANCE: Material dependent. BOILING POINT VENTILATION: N/A. RESPIRATORY PROTECTION: N/A.
(degrees F): N/A. VAPOR PRESSURE (mm Hg @ 20 degrees SKIN AND EYE PROTECTION: N/A.
C): N/A. VAPOR DENSITY (Air = 1): N/A. PERCENT XII.SPECIAL PRECAUTIONS
VOLATILE BY WEIGHT (30 min. @ 275 degrees F): N/A. PRECAUTIONS TO BE TAKEN IN HANDLING AND
EVAPORATION RATE (Butyl Acetate = 1): N/A. SOLUBILITY STORAGE: N/A.OTHER PRECAUTIONS: N/A.
IN WATER: N/A. SPECIFIC GRAVITY(H20= 1): N/A. pH: N/A. XIII.WARNING
VII.FIRE AND EXPLOSION HAZARD DATA FOR PREVIOUSLY INSTALLED FLOOR COVERING
FLASH POINT: N/A. FLAMMABLE RANGE: LEL= N/A; UEL= DO NOT SAND,DRY SCRAPE, BEADBLAST,OR MECHANICALLY
N/A. EXTINGUISHING MEDIA: Water. SPECIAL FIRE PULVERIZE E XISTING RES[ LIENT FL OORING, BACKING OR
FIGHTING PROCEDURES: Protect fire fighters from toxic LINING FE LT.THESE PR ODUCTS M AY CONTAIN EI THER
products of combustion by wearing self-contained breathing ASBESTOS FI BERS OR CRYST ALLINE SILICA.PO SSIBLE
apparatus. UNUSUAL FIRE AND EXPLOSION HAZARDS: CANCER AND RESPIRATORY TRACT HAZARD BY INH ALATION.
AVOID CREATING DUST.SMOKING BY INDIVIDUALS WHO HAVE
None. BEEN EXPOSED TO ASBESTOS FIBERS GREATLY INCREASES
VIII.HEALTH HAZARD DATA THE RISK OF SERIOUS B ODILY HARM. RF CI'S(Resilient Floor
PRIMARY ROUTE(S) OF ENTRY: N/A. TARGET ORGANS: Covering I nstitute)REC OMMENDED WORK PR ACTICES FOR
N/A. EFFECTS OF OVEREXPOSURE: N/A SKIN AND EYES: REMOVAL OF RESILIENT FLOOR COVERINGS AREA DEFINED
NIA. INHALATION: N/A. CARCINOGENICITY: NTP: No; IARC SET OF INS TRUCTIONS ADDRESSED TO THE T ASK OF
Monographs: No, OSHA Regulated: No. MEDICAL REMOVING ALL RESILIENT FLOOR COVERING STRUCTURES.
CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:
XIV.NOTICE
N/K. FIRST AID PROCEDURES: N/A SKIN AND EYES: N/A. Various government agencies have regulations governing the removal
of inplace asbestos-containing materials. If you contemplate the
INHALATION: N/A. INGESTION: N/A. removal of a resilient floor covering structure that contains (or is
IX.REACTIVITY DATA assumed to contain) asbestos, you should determine whether such
STABILITY: N/A. INCOMPATIBILITY: N/A. HAZARDOUS regulations apply.
DECOMPOSITION PRODUCTS: N/A. HAZARDOUS The information presented herein is supplied as a guide to those who
POLYMERIZATION: N/A. handle or use this product. Safe work practices must be employed
X.SPILL OR LEAK PROCEDURES when working with any materials. It is important that the end user
makes a determination regarding the adequacy of the safety
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR procedures employed during the use of this product.
SPILLED: N/A. WASTE DISPOSAL METHOD: Dispose of in
accordance with Federal, State, and Local Waste Disposal N/A-not applicable or not available
Regulations. N/K—none known or not known
r..
AP PROVED k�,
DATE P
4� 377
F E':.� �.E3YG :a-.
NOTIFY BUILDINGS DEH'="?-i �-'':-- "j
- - - - - - - - - - - - - - - - - - - - - � PLUMBER CERTlFICATIt�'. FO -180VINC 2 8A,. PI
iCT , E
I °LUMBI! r
g. ON LEAD CONTENT BEFORE �. F7,�1-�n�,i�Ic;��I -�`�V 0
ALL PLiII�Fr,ily ;1ST" , F{� P,,'_}I;_ ONCF,
&�`1; IJ I CERTIFICATE OF OCCUPANCY 2 RG;!j�fl, R
TESTING w .. -
" c_ SOLDER USED INWA STP.�Pr Irl�7, FI F
ICTRICAL & U ;NG
SUPPLYSYS TEM 0,At,,P T 3, IN1331JLATION
EXCEED 2/I G Circ ::" .
4, FINA CCi`115Tr.11CTION &E-LEC r"!U",'
NIUS T CE C 111c"�C E FOR C.O.
ALL CONST('' ,„a ''HALL E':IEDFT Ypc
O:7 `f;ECOD=s Or
PROPOSED INTERIOR ALTERATIONS WITHIN EXISTING BUILDING `i,�tE (i`,. i'.i `; CE ;�I( L �� i
N OP CONSTRUCTION erRRORS
EXISTING USE: I BANK-GROUP B BUSINESS 2,012 ± GROSS SQFT
PROPOSED USE: I BANK-GROUP B BUSINESS 2,012 ± GROSS SQFT
PROPOSED INTERIOR
ENLARGE WEST SIDE OFFICE ANDNUTILITY CLOSET.
ALTER RESTROOMS FOR ACCESSIBLY ��RE ���������
REQUIRED BEFORE.
GENERAL NOTES I OPEN EAST SIDE OFFICE FOR CUSTOMER SERVICE.
ADD CLOSET IN WORKROOM. OPENING
1.THE ARCHITECTS CERTIFICATION APPLIES ONLY TO DEMONSTRATING THE DESIGNS
REVISE EXISTING CEILING&SYSTEMS.
CONFORMANCE TO THE BUILDING CODE OF THE STATE OF NEW YORK.
2. DEVIATION FROM THESE PLANS, UNAUTHORIZED DUPLICATION OR REUSE WILL NEGATE
2010 Existing Building Code of New York State
ARCHITECTS CERTIFICATION AND IS A VIOLATION OF NYS LAW. DRAWINGS ARE THE I
COPYRIGHT OF THE ARCHITECT. I CLASSIFICATION OF WORK:
3. THE ARCHITECT IS NOT RESPONSIBLE FOR THE DISCOVERY, PRESENCE, PREVENTION, SECTION 403 ALTERATION-LEVEL 1
REMOVAL OR HANDLING OF ASBESTOS, HAZARDOUS MATERIALS, GASSES, FUMES, MOLD AND 403.1 Scope. Level 1 alterations include the removal and replacement or the covering of existing materials,elements,equipment,or
OR MILDEW. fixtures using new materials,elements,equipment,or fixtures that serve the same purpose.403.2 Application. Level 1 alterations shall
4.THE ARCHITECT ASSUMES NO RESPONSIBILITY FOR CONSTRUCTION, MEANS METHODS,
comply with the provisions of Chapter 6.
TECHNIQUES, SEQUENCES, PROCEDURES OR SAFETY PRECAUTIONS AND PROGRAM IN
CONNECTION WITH THE WORK.THE ARCHITECT SHALL NOT BE RESPONSIBLE FOR ERRORS OR SECTION 404 ALTERATION-LEVEL 2
OMISSIONS OF THE OWNER, CONTRACTOR OR SUB CONTRACTORS. 404.1 Scope. Level 2 alterations include the reconfiguration of space,the addition or elimination of any door or window,the
reconfiguration or extension of any system,or the installation of any additional equipment. 404.2 Application. Level 2 alterations shall
5.THE ARCHITECT, NOT CONTRACTED TO CONTROL THE CONSTRUCTION PROCESS IS NOT comply with the provisions of Chapter 6 for Level 1 alterations as well as the provisions of Chapter 7.
RESPONSIBLE FOR ASSURING THE FINAL AS CONSTRUCTED BUILDING AND SITE IS IN
COMPLIANCE WITH ALL BUILDING CODES, LOCAL LAWS, REQUIREMENTS OR SUITABILITY FOR A DEPOSIT
PARTICULAR USE. Chapter 7-Alterations-Level 2-SECTION 701 GENERAL
D/T WINDOW 701.1 Scope. Level 2 alterations as described in Section 404 shall comply with the requirements of this chapter.
6.ALL CONTRACTORS AND SUBCONTRACTORS SHALL PERFORM ALL WORK IN COMPLIANCE Exception: Buildings in which the reconfiguration is exclusively the result of compliance with the accessibility requirements of Section
WITH NEW YORK STATE BUILDING, PLUMBING, MECHANICAL, ELECTRICAL, ENERGY, FIRE - 605.2 shall be permitted to comply with Chapter 6.
SAFETY CODE,AND REFERENCE STANDARDS. REMOVE
N SAFE EXISTING COUNTER I I I I REPLACE Z 1 701.2 Alteration Level 1 compliance. In addition to the requirements of this chapter,all work shall comply with the requirements of
7. OMISSIONS FROM THE DRAWINGS OR THE LACK OF DESCRIPTION OF THE DETAILS OF WORK L COUNTER-J 1 1 WC(S) �1 Chapter 6.
WHICH ARE MANIFESTLY NECESSARY TO CARRY OUT THE INTENT OF THE DRAWINGS OR 30 W X
II
WHICH ARE CUSTOMARILY PERFORMED SHALL NOT RELIEVE THE CONTRACTOR OR 1 I I ,LAV r _ 0 W I 701.3 Compliance.All new construction elements,components,systems,and spaces shall comply with the requirements of the Building
SUBCONTRACTOR FROM PERFORMING SUCH WORK, BUT SHALL BE PERFORMED AS IF 24"D
CORRECTLY SET FORTH AND DESCRIBED TO FURNISH A COMPLETE INSTALLATION IN 1 I I I I J I �1 Code of New York State.
ACCEPTABLE CONDITION. I I I I L _ J II
1 LI I - SECTION 703 BUILDING ELEMENTS AND MATERIALS
8.ALL CONTRACTORS AND SUBCONTRACTORS SHALL FAMILIARIZE THEMSELVES WITH ALL I-II 703.1 Scope.The requirements of this section are limited to work areas in which Level 2 alterations are being performed,and shall apply
DRAWINGS AND SPECIFICATIONS,AND SHALL INSPECT THE EXISTING CONDITIONS IN THE I I EXISTING
beyond the work area where specified.
FIELD AND FIELD MEASURE AND VERIFY ALL DIMENSIONS. DO NOT SCALE DRAWINGS. I I WALL 703.4 Interior finish.The interior finish of walls and ceilings in exits and corridors in any work area shall comply with the requirements of
r- -
9.ALL FIRE EXITS SHALL BE KEPT CLEAR AT ALL TIMES DURING THE COURSE OF EXISTING - - - - - - - - - - the Building Code New York State.
CONSTRUCTION. 1 I J Q
SAFES WORK III 2) � III LAV SECTION 704 FIRE PROTECTION 704.1 Scope.The requirements of this section shall be limited to work areas in which Level 2
111 0- U LL alterations alterations are being performed,and where specified they shall apply throughout the floor on which the work areas are located or
EXISTING COUNTER i i1 I , \ Fr= 1 otherwise beyond the work area.
WALL LEGEND ROOM X O
SAFE III W I I1 I 704.4 Fire alarm and detection.An approved fire alarm system shall be installed in accordance with Sections 704.4.1 through 704.4.3.
40"W X I IL_ - J I L�J An approved automatic fire detection system shall be installed in accordance with the provisions of this code and NFPA 72. Devices,
36"D combinations of devices,appliances,and equipment shall be approved.The automatic fire detectors shall be smoke detectors,except
EXISTING EXTERIOR WALLS TO REMAIN- 81-211 ± EXISTING CEILING - EXISTING I I I r- - - - -r - that an approved alternative type of detector shall be installed in spaces such as boiler rooms,where products of combustion are present
r
CUT/ PATCH INTERIOR AS REQ. - - - - + - - - - - - - - - - - - SINK I I / IF 7 EXISTING MOP during normal operation in sufficient quantity to actuate a smoke detector.
0 - - - - =J� / IL �
EXISTING INTERIOR WALLS TO REMAIN 10'-0" EXISTING CEILING SINK TO BE 704.4.1 Occupancy requirements.Afire alarms stem shall be installed in accordance with Sections 704.4.1.1 through 704.4.1.7.
L - RELOCATED Existingalarm-notification appliances shall be automatically activated throughout the building.Where the building is notequipped with a
F- = _ _� EXISTING INTERIOR WALLS TO BE REMOVED - - - - PP y 9 9 g
- Tl fire alarm system,alarm-notification appliances within the work area shall be provided and automatically activated.
ILL! r-r I I EXIST Exceptions:1.Occupancies with an existing, previously approved fire alarm system.
NEW INTERIOR WALL TO EXISTING GYPSUM BOARD ON WOOD ROOF TRUSS:
I I UT I L. U 2.Where selective notification is permitted,alarm-notification appliances shall be automatically activated in the areas selected.
7
z 11 J I
1-5/8"X 3-5/8" 22 GAUGE STEEL STUDS AT 16" O.C,WITH ONE LAYER 5/8" I m W SECTION 706 ACCESSIBILITY 706.1 General.A building,facility, or element that is altered shall comply with Section 605.
A GYPSUM BOARD EACH SIDE. WALL CAVITY, SOUND CONTROL INSULATION. F- co I I Q
WW
I I \ ELEC SECTION 605 ACCESSIBILITY
> 605.1 General.A building,facility or element that is altered shall comply with the applicable provisions in Sections 605.1.1 through
N I I I 605.1.12, Chapter 11 of the Building Code of New York State and ICC/ANSI A117.1 unless it is technically infeasible.Where compliance
I I r III / with this section is technically infeasible,the alteration shall provide access to the maximum extent that is technically feasible.
LU III
I I R MO I I I > III ,/ A building,facility or element that is constructed or altered to be accessible shall be maintained accessible during occupancy.
/I �CO ER J u O i i L Exceptions: 1.The altered element or space is not required to be on an accessible route unless required by Section 605.2
ALTER 2.Accessible means of egress required by Chapter 10 of the Building Code of New York State are not required to be provided in existing
I I buildings and facilities
W II
JI I _j EXISTING 605.1.1 Entrances.Where an alteration includes alterations to an entrance,and the building or facility has an accessible entrance on an
Q I I Q OFFICE accessible route,the altered entrance is not required to be accessible unless required by Section 605.2. Signs complying with Section
1 I 1110 of the Building Code of New York State shall be provided.605.1.2
II n II
CUT & PATCH 1i W I I I I W CUT & PATCH 605.1.9 Toilet rooms.Where it is technically infeasible to alter existing toilet and bathing facilities to be accessible,an accessible unisex
> toilet or bathing facility is permitted.The unisex facility shall be located on the same floor and in the same area as the existing facilities.
SUSPENDED ;,; O II II O SUSPENDED
I 1 CEILING 605.1.11 Thresholds.The maximum height of thresholds at doorways shall be 3/4 inch(19.1 mm). Such thresholds shall have beveled
C E I L.I N G I I2 edges on each side.
EXISTING WOOD ROOF TRUSS III W I I W
605.1.12 Extent of application.An alteration of an existing element, space,or area of a building or facility shall not impose a requirement
for greater accessibility than that which would be required for new construction.Alterations shall not reduce or have the effect of reducing
1accessibility of a building,portion of a building,or facility
REVISE EXISTING I I XISTING
SUSPENDED CEILINGw VESTIBULE \ 605.2 Alterations affecting an area containing a primary function.Where an alteration affects the accessibility to a,or contains an area of,
primary function,the route to the primary function area shall be accessible.The accessible route to the primary function area shall include
W I I _ _ _ J toilet facilities or drinking fountains serving the area of primary function.
W
LU _71 Exceptions: 1.The costs of providing the accessible route are not required to exceed 20 percent of the costs of the alterations affecting
W
U the area of primary function
L EXISTING 2.This provision does not apply to alterations limited solely to windows,hardware,operating controls,electrical outlets and signs.
11- U) MASONRY 3.This provision does not apply to alterations limited solely to mechanical systems,electrical systems, installation or alteration of fire
0 U BEARING WALLS protection systems and abatement of hazardous materials.
Q4.This provision does not apply to alterations undertaken for the primary purpose of increasing the accessibility of an existing building,
fariliN nr araman4
O 0
00 COVERED ENTRY
EXISTING SLAB ON GRADE El 1-1
SCHEMATIC SECTION
EXISTING CONSTRUCTION EXISTING / DEMOLITION PLAN
SCALE: 1/4"=1'-01"
S.C.T.M. # 1000 143.00 03.00 004.002
KEY MAP
��� X52
/P�1¢ � ���P°t:N t,, 6ri(. Nicosia
t'Ves�i3halS;"ft';1 � ���
`� , Iz�C�IST�Iz�D �tzGtilT�GT
U�drPu
, yo
�6'�"w
PO Box 879, Rocky Point, N.Y. 11778
Telephone: (631) 928-4456
`� E-Mail: architect@optonline.net
INTERIOR ALTERATIONS
._ ARED ASC
4 � � '' E3RID6EHAMI=TON NATIONAL BANK
u
ti� �qC, NICO
ss
` C9 10900 MAIN RD MATTITUCK, N.Y.
`µ f EXI5TING/ DE1�0/ NOTE5
?"G ?°� 7,
%" 1_ Scale: As shown Rev Date: 3-11-2014
N Q7L c: 5
tS SITE �nyo �,wr
� Job#: 130400 By: E.N. ,_
ND 39-41
WALL LEGE
99f�- �040
36 rrtirr LO
E C 915 12 min 54 man � V
EXISTING EXTERIOR WALLS TO REMAIN- E c00 0 12 min 305 12 maX 1,370
® 24 min
CUT/PATCH INTERIOR AS REQ. CD 610
610 - 305
Section 609.3 42 min-
0 EXISTING INTERIOR WALLS TO REMAIN -1065
Q EXISTING INTERIOR WALLS TO BE REMOVEDx
- - - - - - - - - - - - - - - - LO-
Co
M oo ...._a. aWw_. Section X09,4
NEW INTERIOR WALL TO EXISTING GYPSUM BOARD ON WOOD ROOF TRUSS: o'1-5/8"X3-5/8" 22 GAUGE STEEL STUDS AT 16" O.C. WITH ONE LAYER 5/8"
A GYPSUM BOARD EACH SIDE. WALL CAVITY, SOUND CONTROL INSULATION. G i M',Cn
I 1
1 1 7 -97 7-9
CEILING NOTES I 1 180 -230 180-230
REVISE EXISTING 2X4&2X2 SUSPENDED CEILING GRID (a) Below Grab Bar (b)Above Grab Bar Fig. 6f14.5.2 Fig.604.5.1
ACOUSTICAL LAY-IN CEILING TILES Rear Wal'I Grab Bar for Water Closet
SidWall Grab Bar for Water ClosetREDISTRIBUTE EXISTING LIGHTING FIXTURES Fig.604.7
'e
Dispenser Location 606:6 ExposedPipes and Surfaces.1N`atersupply
REVISE DISTRIBUTION AND RETURNS FOR ALTERATION. 902.3 Height.The taps of dining surfaces and work and drainpipes under lavatories and sinks shall be
HVAC SYSTEM TO BE IN CONFORMANCE WITH NFPA STANDARDS& NYS CODE I surfaces shall be 28 inches(710 mm)minimum and insulated or otherwise configured to protect against
ALL WIRING ABOVE CEILING TO BE APPROVED FOR SUCH USE IN RETURN PLENUM. I 34 inches (865 mm) maximum in height above the contact.There shall be no sharp or abrasive sur-
floor. faces under lavatories and sinks.
ALL ELECTRICAL WORK TO CONFORM TO NYS CODE REFERENCE 606.7
STANDARD NFPA 70-80 PROVIDE CERTIFICATE OF ELECTRICAL INSPECTION I penserandOperableParts.dyers hall parts on towel Table pensers and hand dryers shall comply with Table
1 1 606 Lavatories and Sinks 606.7.
606.1 General. Accessible lavatories and sinks
LIFE SAFETY LEGEND I 1 shall comply with Section 606.
PROVIDE/REVISE EXISTING ILLUMINATED, DIRECTIONAL EXIT SIGNS 606.2 Clear Floor Space.A clear floor space com-
EXIT IN CONFORMANCE WITH 1003.2.10.1 thru 1003.2.10.5. INCLUDING 90 plying
with
sSe do provided Knee and toe ositioned for
forward
clear-
ance MIN. BACK-UP ILLUMINATION IN CASE OF PRIMARY POWER LOSS. I complying with Section 306 shall be provided.
PROVIDE/REVISE EXISTING EMERGENCY EGRESS ILLUMINATION 54'-2" + The dip of the overflow shall not be considered in
SYSTEM IN CONFORMANCE WITH 1003.2.11.2 determining knee and toe clearances.
PROVIDE APPROVED WALL MOUNTED 2-4 RATED FIRE EXTINGUISHERS IN 5'-4 1/2" ol 7'-6" 19'-7 1/2" ol 18'-6 3/4" EXCEPTIONS:
CONFORMANCE WITH NYSFC SECTION 906. THE EXTINGUISHERS SHALL
BE ACCESSIBLE AND VISIBLE WITHIN THE MEANS OF EGRESS 1. A parallel approach complying with Section ; °°
305 shall be permitted to a kitchen sink in a
FINISH NOTES: DEPOSIT
6'-11 3/4" 11'-2 1/2" space where a cook top or conventional
range is not provided.
cr D/T WINDOW REPLACE EXISTING
INTERIOR DOORS: WHITE PRE FINISHED r WATER CLOSETS WITH
6 PANEL HOLLOW CORE DOORS IN WOOD FRAME. O _ ADA COMPLIANT Ftg.st16.3
0 o NEW CLOSET _ + FIXTURES. MAINTAIN 16" HreightofLavatories and Sinks
PAINTED FINGER JOINTED PINE COLONIAL CASINGS = SAFE REPLACE EXISTING COUNTER: ao „
SOLID CORE DOORS AT RESTROOMS. N N NEW 6068 SL iv / z_ z_ 1 -6 cn MIN 18" MAX CL TO WALL.
X
ADA LEVER STYLE HARDWARE 30"W X Ee- � I = I - --------
AV w PROVIDE PAPER 404.2.3.4 Recessed DooLrs. Where any
0 0 / DISPENSER. 1 , obstruction within 18 inches (455 mm) of the
WALLS: 24 D EXIST 1,-4„ 1� � TILE � �• � � latch side of a doorway projects more than s
BEAD,TAPE AND 3 COATS SPACKLE AT NEW WALLBOARD.
PAINT WATER BASED ENAMEL DRYWALL PRIMER AT NEW WALLS �S� Z L- 1i3 min y p !
EX REINFORCE WALLS FOR c' i 445 inches(205 mm) beyond the face of the door,
AND FINISH COAT ON EXISTING WALLS. _ BARS j ' maneuvering as of the door,
NEW 42 ,36 & 18 GRAB E measured perpendicular to the face
TWO COATS SEMI-GLOSS WATER BASED ENAMEL AT TRIM Mclearances for a forward
ti
81-33/411 4-6 MIN. [�, 5'4' MIN. approach shell be provided.
FLOORS: EXISTING - - - _ _ _ _ _ _ _ _ _ _ _ _ _ _ - - _ MAINTAIN OR REPLACE
REPLACE TILE FLOORS IN RESTROOMS SAFES REVISE FINISHES ON EXISTING TELLER STATIONS WORK �OrO�/I�LAV N 75 CFM EXHAUST FANS
REVISEDFLOORING SELECTIONS T.B.D. N a FrantA Approach,
MINIMUM FINISH FIRE CLASSIFICATIONS: EXISTING COUNTER in W �� TILE O ftp ach Pull Side
SAFE ROOM _ _ _
803.5 Interior finish requirements based on group. Interior wall and ceiling finish shall have a flame spread index not greater Z MIRROR
than that specified in Table 803.5 for the group and location designated. Interior wall and ceiling finish materials,other than iv - - _ SOAP AND PAPER NO CLOSER IS PROPOSED = 0"
p 9 p 9 9 Q 40 W X I *54 min (1370)if closer is provided
textiles,tested in accordance with NFPA 286 and meeting the acceptance criteria of Section 803.2.1, shall be permitted to be 36"D _M DISPENSERS *lf'haffi closer and late are provided
used where a Class A classification in accordance with ASTM E 84 is required. `rN 8'-2"± EXISTING CEILING _ __ -----------
NE 3068 MOP SINK i y-- -i
TABLE 803.5 INTERIOR WALL AND CEILING FINISH REQUIREMENTS BY OCCUPANCY 101-011 + EXISTING CEILING - - - - - opo RELOCATED d o I <* 1 24 min
1
WALLS: GROUP B NONSPRINKLED ROOMS AND ENCLOSED SPACES: CLASS C MIN. EXIS_ n c? - NORTH 12 min I i E EN 1 610
I I
FLOORS: N 3/4"± EX.
LU N 30500
I I
I I
804.1 General. Interior floor finish and floor covering materials shall comply with Section 804.2 through 804.4.1. iv J Co +i
. I I
r 1 D Z UTIL - _____ -----
Exception: Floor finishes and coverings of a traditional type, such as wood,vinyl, linoleum or terrazzo, and resilient floor o W N
covering materials that are not comprised of fibers. LU REPLACE WITH TILE FLOOR OVER - VCT w m (b)Front Approach,
W w/ EXISTING P.C. SLAB ON GRADE ELEC Push Slue (f) Latch Approach, Pull Side
804.2 Classification. Interior floor finish and floor covering materials required by Section 804.4.1 to be of Class I or II materials > r
shall be classified in accordance with NFPA 253. The classification referred to herein corresponds to the classifications N r CV
determined by NFPA 253 as follows: Class I, 0.45 watts/cm2 or greater; Class 11, 0.22 watts/cm2 or greater. IT
804.3 Testing and identification. Interior floor finish and floor covering materials shall be tested by an approved agency in 3/4" PLYWOOD 603.3 Mirrors. Mirrors located above lavatories or countertops shall be installed with the bottom edge of the
o reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground. Mirrors not located
accordance with NFPA 253 and identified by a hang tag or other suitable method so as to identify the manufacturer or supplier o above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 35 inches
and style,and shall indicate the interior floor finish or floor covering classification according to Section 804.2. Carpet-type floor M NEW WALLS (890 mm) maximum above the finish floor or ground.
coverings shall be tested as proposed for use, including underlayment. Test reports confirming the information provided in the
manufacturer's product identification shall be furnished to the code enforcement official upon request. REVISE CEILING +i Z
Ed I
804.4 Interior floor finish requirements. In all occupancies, interior floor finish and floor covering materials in exit enclosures, exit REPLACE CARPET 904.4 Sales and Service Counters. Sales counters and service counters shall comply with 904.4.1 or
904.4.2. The accessible portion of the counter top shall extend the same depth as the sales or service
passageways, corridors and rooms or spaces not separated from corridors by full-height partitions extending from the floor to counter top.
the underside of the ceilingshall withstand a minimum critical radiant flux as specified in Section 804.4.1. - <
p X �
M REVISE CEILING EXPAND EXISTING o EXCEPTION: In alterations, when the provision of a counter complying with 904.4 would result in a
804.4.1 Minimum critical radiant flux. Interior floor finish and floor covering materials in exit enclosures, exit passageways and EXIT OFFICE ci reduction of the number of existing counters at work stations or a reduction of the number of existing mail
corridors shall not be less than Class I in Groups 1-2 and 1-3 and not less than Class II in Groups A, B E, H, 1-4 M, R-1 R-2 and Z� REPLACE CARPET 0
p p w w •' boxes, the counter shall be permitted to have a portion which is 24 inches(610 mm) long minimum
S. In all areas,floor covering materials shall comply with the DOC FF-1 "pill test"(CPSC 16 CFR, Part 1630). z Q NEW CARPET complying with 904.4.1 provided that the required clear floor or ground space is centered on the accessible
U) length of the counter.
r
904.4.1 Parallel Approach. A portion of the counter surface that is 36 inches (915 mm) long
EXISTING-1B minimum and 36 inches (915 mm) high maximum above the finish floor shall be provided. A clear floor or
VESTIBULE ground space complying with 305 shall be positioned for a parallel approach adjacent to the 36 inch (915
mm) minimum length of counter.
VERIFY EXISTING 4"
VENT THRU ROOF c? EXCEPTION: Where the provided counter surface is less than 36 inches (915 mm) long, the
ALTER LAV 1 ALTER LAV 2 ALTER entire counter surface shall be 36 inches (915 mm) high maximum above the finish floor.
UTILITY RM 904.4.2 Forward Approach. A portion of the counter surface that is 30 inches (760 mm) long
1'-3" 21'-7 3/4" 4 1/2" T-7 1/2" 4 1/2" 8'-0 1/4" 4 1/2" 13'-3" 1'-3"
minimum and 36 inches (915 mm) high maximum shall be provided. Knee and toe space complying with
306 shall be provided under the counter. A clear floor or ground space complying with 305 shall be
positioned for a forward approach to the counter.
C 4"V 1.5„V Z 1.5"v 1.5„V COVERED ENTRY
0Z
Z Z >
Z Z ca
Z
> >
W w 1/2" HW 1/2" HW 1/2" HW
Q Q 1/2" CW Z 1/2"CW
S.C.T.M. # 1000 143.00 03.00 004.002
EXISTING
E NEW SIK 1/2 CW
Z TIN X CATION
SINK 6ric N
U) P:
SERVICE SIN CONSTRUCTION PLAN
X uX 0 REPLACE TO BE
C9 1.5"W C7 FIXTURE 1.5"W RELOCATED fZ�G�IST�Iz�D �fZG�i1T�GT
Z Z SCALE: 1/4" =1'-0"
Z I Z PO Box 879, Rocky Point, N.Y. 11778
X - X
Telephone: (631) 928-4456
uJ 1.5"W W 1.5"W E-Mail: architect@optonline.net
FLOOR SLAB 211W EDAp INTERIOR ALTERATIONS
�. �C NIcoS��'�',�t BRID6EHAMPTON NATIONAL BANK
4„W Go
10900 MAIN RD MATTITUCK, N.Y.
VERIFY EXISTING 4" DIA APPROVED WASTE LINE, PITCH 1/4" 4"W APPROVED WASTE LINE, PITCH 1/4" PER FOOT
PER FOOT TO EXISTING BUILDING SANITARY DRAIN TO EXISTING BUILDING SANITARY DRAIN
* � * FLOOR PLAN/RISER/ NOTES
APPROVED COPPER HOT AND COLD WATER SUPPLY LINES. 0 ,w Scale: As shown Rev Date: 3-11-2014
PLUMBING RISER DIAGRAM SERVICE OR REPLACE EXISTING ATTIC MOUNTED ELECTRIC HOT WATER HEATER. A-2
Job#: 130400 By: E.N.